wheel dehumidifier 转轮除湿机 特点 features ▲ 搭配普通冷却水空载可达-32℃~-40℃露点，搭配冷水机空载情况下，甚至可达-40℃以下露点； ▲ 除湿与再生连续循环工作，确保露点温度稳成一条直线； ▲ 采用陶瓷纤维为基材的蜂巢转轮，除湿效果好； ▲ 不产生污染确保塑胶品质； ▲ 转轮可耐1000℃高温以防火灾，防酸耐碱，平均寿命3-8年以上； ▲ 再生温度为180℃，比传统的热风干燥机节省2/3时间和30-40%的能源； ▲ 一台除湿机可以搭配数个独立干燥料斗使用。 ▲ with the ordinary high water cooling set up to -32℃～-40 ℃ dew point, no-load conditions with cooling water downloaded, and even up to the dew point below -40℃. ▲ desiccantand regeneration continuous loop and ensure that the dew point temperature stability into a straight line. ▲ using ceramic fiber for the base runner hives, dehumidifying effect is good. ▲ do not produce pollution to ensure plastic’s quality. ▲ wheel can be resistant to high temperature 1000 ℃ in case of fire, acid and alkali resistant, average life expectancy is up to 3-8 years. ▲ regenerative temperature is 180℃, than traditional drying machine save two-thirds time and 30-40% of the energy . ▲ a dehumidifier can match a few independent drying hoppers to be used.

• 品牌 文惠牌
• 种类干燥机
• 产品别名 塑料除湿干燥机
• 产品用途 工程塑料的除湿与干燥
• 型号whcd-120h
• 电动机功率 1.475
• 外形尺寸0.6*0.78*1.435
• 重量265