重型隔热型材撞角机：本机采用德国技术研制开发。把两根已切割成45度的铝合金窗料，利用放入窗料内的角码，移动撞叉，将两根窗料挤压钉紧、牢固地形成90度角，该机根据角码特点。可设计成单边四点撞，因而挤压更牢固、由于加大尺寸和撞力，特别适合隔热型材框料、扇料和门料的组角。

The heavy type heat insulation section bar tries angle machine: This machine adopt the Germany technology to develop exploitation. Cutting already becomes 45 degree of aluminium alloy window material with two , make use of putting a window inside expecting that piece of inner code , displacement bump against a fork, the squeezing nail tightens two windows material , form 90 degree of angle solidly, be machine's turn to stack a characteristic according to the angle. Single-side designing Cheng is tried at 4 o'clock , is squeeze as a result solider , draw since enlarging a dimension to try a force, be suitable to the group angle that heat insulation section bar frame material , fan material and the door expect that specially.

 油泵电机功率
 2.2KW 
 
油泵额定压力 
  80MPA
 
 工作使用气压
  0.6~0.7MPA
 
 最大工作行程
  70MM
 
 最大工作推力
  5000KG
 
 机床外形尺寸（长*宽*高）
  1200*1030*1000mm
 
 机床重量
  500KG